TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 913 of 1318

TM 9-2320-328-13&P-1

0081-7

DRAFT

0081

Change 1

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

HWT3218

..

WARNING

..

ICON 3

..

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry and tools may short across electrical circuits and cause damage to

equipment, or severe burns or electrical shock to personnel.

..

Step 12.

Pull battery disconnect switch to off position (WP 0007).

Reconnect passenger side

body wire harness 12-pin connectors.

Disconnect main wire harness passenger side

body wire harness connector.

Push battery disconnect switch to on position

(WP 0007).

With a test set, check for 4 to 6 VDC between wire 3853 (yellow) at main

wire harness passenger side body wire harness connector, terminal 15 to a known

good ground.

..

If 4 to 6 VDC are present, repair wire 3853 in lower passenger side body

wire harness if repairable (TM 9-2320-325-14&P), or replace passenger

side body wire harness (WP 0298).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION