TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 918 of 1318

TM 9-2320-328-13&P-1

0081-12

DRAFT

0081

Change 1

..

HWT3103

..

Step 17.

Pull battery disconnect switch to off position (WP 0007).

Remove cab instrument

panel B (WP 0205).

Disconnect cab pump control wire harness water level gauge

connector from cab WATER level gauge.

Disconnect cab pump control wire harness

foam level gauge connector from cab FOAM A level gauge.

Connect cab pump

control wire harness water level gauge connector to cab FOAM A level gauge.

Push

battery disconnect switch to on position (WP 0007).

Check if cab FOAM A level gauge

1/4 and 3/4 LEDs flash alternately.

..

If cab FOAM A level gauge 1/4 and 3/4 LEDs do not flash alternately,

replace cab WATER level gauge (WP 0200).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION