TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 912 of 1318

TM 9-2320-328-13&P-1

0081-6

DRAFT

0081

Change 1

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

HWT3217

..

WARNING

..

ICON 3

..

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry and tools may short across electrical circuits and cause damage to

equipment, or severe burns or electrical shock to personnel.

..

Step 11.

Pull battery disconnect switch to off position (WP 0007).

Remove passenger side light

bezel cover (WP 0335).

Disconnect passenger side body wire harness 12-pin

connector.

Push battery disconnect switch to on position (WP 0007).

With a test lead

set, check for 4 to 6 VDC between wire 3853 (yellow) at passenger side body wire

harness 12-pin connector, terminal 3 to a known good ground.

..

If 4 to 6 VDC are present, repair wire 3853 in upper passenger side body

wire harness if repairable (TM 9-2320-325-14&P), or replace passenger

side body wire harness (WP 0298).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION