TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 391 of 1390

TM 9-2320-328-13&P-2

0147-1

DRAFT

0147

FIELD LEVEL MAINTENANCE

HYDRAULIC RESERVOIR FLUID LEVEL SWITCH REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Hydraulic reservoir fluid level switch is located on driver side of hydraulic reservoir.

•

Note position of switch prior to removal to ensure proper installation.

1.

Disconnect pump house wire harness connector (1) from hydraulic reservoir fluid level switch connector (2).

2.

Remove hydraulic reservoir fluid level switch (3) from hydraulic reservoir (4).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2793

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tape, Teflon (WP 0400, Item 25)

References

WP 0391, Fig. 10

Equipment Conditions

Pump house panel K access panel

opened (WP 0008)

Hydraulic reservoir drained (WP 0145)