TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 394 of 1390
TM 9-2320-328-13&P-2
0148-2
DRAFT
0148
REMOVAL
NOTE
•
Position suitable drain pan under hoses to catch hydraulic fluid.
•
Tag and mark hoses prior to removal to ensure proper installation.
•
Cap and plug hoses prior to removal.
•
Remove cable ties as required.
•
Perform Steps (1) through (3) to provide clearance for hydraulic reservoir and hoses
removal.
1.
Remove two locknuts (1), cradle (2), U-bolt (3), and bracket (4) from pipe (5).
Discard locknuts.
2.
Remove coupling (6) (WP 0313) and pipe (5) from valve (7).
3.
Remove line (8) from elbow (9).
HWT2029
Back to Top
