TM-9-2320-365-20-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-365-20-2 - Page 1089 of 1432

VOLTAGE TEST
Remove rings, bracelets, watches, necklaces,
and any other jewelry before working around
vehicle.
Jewelry can catch on equipment and
cause injury or short across electrical circuits
and cause severe burns or electrical shock.
WARNING
Change 2
2-1999
TM 9-2320-365-20-2
(1) Remove wing screw from power
distribution shelf.
(2) Loosen wing screw on electrical
distribution block cover.
(3) Remove electrical distribution block cover
from power distribution shelf.
(4) Set multimeter to volts DC.
(5) Connect positive (+) probe of multimeter to
terminal lug TL9.
(6) Connect negative (-) probe of multimeter to
known good ground and note reading on
multimeter.
(7) If 24 VDC is not present, go to step 2 of
this fault.
(8) If 24 VDC is present, contact supervisor,
Precision Lightweight Global Positioning
System Receiver (PLGR) troubleshooting
needs to be performed.


Back to Top