TM-9-2320-365-20-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-365-20-2 - Page 1085 of 1432

VOLTAGE TEST
Remove rings, bracelets, watches, necklaces,
and any other jewelry before working around
vehicle.
Jewelry can catch on equipment and
cause injury or short across electrical circuits
and cause severe burns or electrical shock.
WARNING
Change 2
2-1995
(1) Remove wing screw from power distribution
shelf.
(2) Loosen wing screw on electrical distribution
block cover.
(3) Remove electrical distribution block cover from
power distribution shelf.
(4) Set multimeter to volts DC.
(5) Connect positive (+) probe of multimeter to
terminal lug TL8.
(6) Connect negative (-) probe of multimeter to
known good ground and note reading on
multimeter.
(7) If 24 VDC is not present, go to step 2 of this
fault.
(8) If 24 VDC is present, contact supervisor,
Enhanced Position Location Reporting System
(EPLRS) troubleshooting needs to be
performed.
TM 9-2320-365-20-2


Back to Top