TM-9-2320-365-20-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-2 - Page 1087 of 1432

Change 2

2-1997

TM 9-2320-365-20-2

(1) Remove circuit breaker CB5 from Power

Distribution Panel (PD1).

(2) Set multimeter to ohms.

(3) Connect positive (+) probe of multimeter to

one terminal of circuit breaker CB5.

(4) Connect negative (-) probe of multimeter to

other probe of circuit breaker CB5 and note

reading on multimeter.

(5) If continuity is not present, replace circuit

breaker CB5 (para 20-87).

(6) If continuity is present, perform Special

Purpose Kit Troubleshooting task u1. No

Power to Digitization Rack.

Perform steps (7) through (10), if

continuity is present through circuit

breaker CB5.

(7) Install circuit breaker CB5 in Power

Distribution Panel (PD1)

(8) Position electrical distribution block cover

on power distribution shelf.

(9) Tighten wing nut on electrical distribution

block cover.

(10) Install wing screw on power distribution

shelf.

CONTINUITY TEST

NOTE