TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 111 of 576

4-33

TM 9-2330-227-14&P

WALL RECEPTACLES AND BASE, 110-VOLT - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL - CONTINUED

NOT E

If replacing only one wall receptacle, go to step 15. If replacing a section of wall

receptacles, repeat steps 1 thru 4 for each wall receptacle being replaced.

5.

6.

Elbow (8) and

base (1)

7.

Base (1)

8.

Van body (11)

9.

Base (1) and

van body (11)

INSTALLATION

10.

Van body (11)

Elbow cover (7)

Using 3/16-inch flat-tip screwdriver,

pry off.

Two screws (9)

Using 3/16-inch flat-tip screwdriver,

unscrew and take out.

Three screws (10)

Using number two cross-tip screwdriver,

unscrew and take off.

Base (1)

a. Using diagonal cutting pliers,

cut damaged section.

b. Take off.

Elbow (8)

Take off.

Base (1)

a.

b.

c.

d.

e.

Measure section to be replaced.

Using hand hacksaw, cut base (1).

Measure position of screw holes on

van body (11), and mark base (1).

Using portable drill and 3/16-inch

twist drill, drill holes in base (1)

at guide marks.

Put in place.