TM 9-2330-227-14&P
LIGHT SWITCHES, 24-AND 110-VOLT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
17. Switch (3)
Two screws (4)
Screw in, and tighten using 3/16-inch
and box (1)
flat-tip screwdriver.
18. Box (1)
Plate (2)
Put in place.
19. Plate (2)
Two screws (10)
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
FOLLOW-ON
TASK ENDS HERE
DOOR SWITCHES, 110-VOLT
MAINTENANCE:
NOT E
Check operation of lights (page 2-22).
This task covers:
a. Removal (page 4-38)
b. Installation (page 4-38)
INITIAL SETUP
Tools
Screwdriver, cross-tip, number two
Screwdriver, flat-tip, 3/16-inch
Personnel Required
One
TA231237
4-37