TM 9-2330-227-14&P
JUNCTION BOXES, 110-VOLT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
4.
Coupling (10)
Bushing (11)
a. Using 3/16-inch drive pin punch and
and box (5)
ball-peen hammer, tap left side of
bushing (11) toward van body (9)
until loose.
b. Unscrew bushing (11), and take off.
c. Repeat steps 4a and b for other
bushing (11).
5.
Box (5)
6.
Box (5) and
van body (9)
7.
Van body (9) and
nipple pipe (6)
8.
Box(5) and
van body (9)
Coupling (10)
a. Take off.
b. Repeat step 5a for other coupling.
Four screws (12)
Using number two cross-tip screwdriver,
unscrew and take off.
Box (5)
Take off.
Two grommets (13)
Using long round-nose pliers, take off.
4-43