TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 125 of 576
TM 9-2330-227-14&P
JUNCTION BOXES, 110-VOLT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
43.
Coupling (23)
a.
b.
44.
Coupling (23),
Bushing (24)
a.
two wires (22),
and box (18)
b.
c.
45.
Box (18),
nipple pipe (10),
and wires (14)
Bushing (17) and
nut (25)
a.
b.
c.
Put in place.
Repeat step 43a for other coupling.
Slip over wires (22), and screw in
using 3/16-inch flat-tip screwdriver.
Screw into coupling (23).
Using ball-peen hammer and 3/16-inch
drive pin punch, tap right side of
bushing (24) toward van (5) until
tight.
Slip nut (25) over wires (14).
Screw nut (25) in pipe (10).
Screw bushing (17) toward box (18),
and using hammer and 3/16-inch drive
pin punch, tap until tight.
4-47
Back to Top
