TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 127 of 576

4-49

TM 9-2330-227-14&P

COMPOSITE LIGHT ASSEMBLY

This task covers:

a. Removal (page 4-49)

c. Installation (page 4-51)

b. Lamps, Lens, and Door Assembly

Replacement (page 4-50)

INITIAL SETUP

Tools

Personnel Required

Handle, ratchet, 3/8-inch drive

One

Screwdriver, flat-tip, 3/16-inch

Socket, 3/8-inch drive, 9/16-inch

ACTION

LOCATION

ITEM

REMARKS

NOT E

Both composite light assemblies are removed and installed, and lamp, lens, and door

assemblies are replaced in the same way. These procedures are for one. Repeat for

the other.

REMOVAL

NOT E

Tag wires to aid in installation (page 4-4). If wire connectors are to be repaired or

replaced, go to wire connector procedure (page 4-71).

Removal is not necessary for lamp, lens, or door assembly replacement. If replacing

lamp, lens, or door assembly only, go to step 4. If circuit marker bands are missing

or not readable, replace (page 4-73).