TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 119 of 576
TM 9-2330-227-14&P
CIRCUIT BREAKER, 110-VOLT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
6.
Continued
7.
8.
Ground tab (7) and
ground plate (8)
9.
Contact (4)
10.
Contact (4)
and wire (5)
11.
Box (2)
12.
Cover (1) and
box (2)
Circuit
breaker (11)
b. Pull circuit breaker (11) away from
plate (10) and take out.
a. Lineup prongs on circuit breaker (11)
with slots in plate (10).
b. Put circuit breaker prongs in slots on
plate (10).
c. Push in until seated.
Screw (9)
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
Wire (5)
Put in place.
Screw (6)
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
Cover (1)
Put in place.
Four screws (3)
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
NOT E
FOLLOW-ON MAINTENANCE: Check operation of circuit breaker (page 2-8).
TASK ENDS HERE
TA231239
4-41
Back to Top
