TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 113 of 576
TM 9-2330-227-14&P
LIGHT SWITCHES, 24-AND 110-VOLT
This task covers:
a. Removal (page 4-35)
b. Installation (page 4-36)
INITIAL SETUP
Tools
Personnel Required
Pliers, long round-nose
One
Screwdriver, cross-tip, number two
Screwdriver, flat-tip, 3/16-inch
ACTION
LOCATION
ITEM
REMARKS
WARNIN G
Contact with live 110-volt electrical wires could result in serious injury or death. Make
sure power source is disconnected before performing maintenance on the electrical
system.
NOT E
Tag wires to aid in installation (page 4-4). All light switches are removed and installed
the same way. This task is for one; repeat for the others.
REMOVAL
1.
Plate (1)
Two screws (2)
Using 3/16-inch flat-tip screwdriver,
unscrew and take off.
4-35
Back to Top
