TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 128 of 576
TM 9-2330-227-14&P
COMPOSITE LIGHT ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
CAUTION
Do not pull on wires, only pull connectors apart. Pulling on wires could damage them.
1.
Frame (1)
Eight
Pull apart.
connectors (2)
2.
Frame (1) and
Two screws (4) and
Using 9/16-inch socket and ratchet handle
composite light
Iockwashers (5)
with 3/8-inch drive, unscrew and take
assembly (3)
out.
3.
Frame (1)
Composite light
Take off.
assembly (3)
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT
4.
Composite light
Six captive
Using 3/16-inch flat-tip screwdriver,
assembly (3)
screws (6)
unscrew and take out.
Door and lens assembly (7) will
come off with screws (6).
NOT E
Do not remove preformed packing unless damaged, deteriorated, and replacement is
necessary.
5.
Preformed
Using 3/16-inch flat-tip screwdriver,
packing (8)
pry out of groove.
6.
Composite light
Four lamps (10)
Push in, turn one-quarter turn
body (9)
counterclockwise, and take out.
NOT E
Top lamp in light assembly is taillight, second lamp is stop-turn lamp, third down is
blackout taillight, and bottom lamp is blackout stoplight.
7.
Four lamps (10)
Place in proper socket (11), push in, and
turn one-quarter turn clockwise.
8.
New preformed
If removed, place in groove.
packing (8)
9.
Composite light
Door and lens
Place in position.
body (9)
assembly (7)
4-50
Back to Top
