TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 137 of 576

TM 9-2330-227-14&P

CLEARANCE LIGHT ASSEMBLY - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL - CONTINUED

7.

8.

9.

10.

NOT E

If circuit marker bands are missing or not readable, replace (page 4-73).

Light body (2) and

Four screws (9) and

Using number two cross-tip screwdriver,

outside wall (8)

Iockwashers (10)

unscrew and take out.

Outside wall (8)

Light body (2),

Pull light body out from wall (8) until

gasket (11), and

connector halves (12) are outside of

connector

wall (8).

halves (12)

Wire harness (13)

Connector

Take apart.

and light body (2)

halves (12)

Make sure connector half to wire

harness stays outside of wall (8).

Light body (2)

Gasket (11)

Using putty knife, scrape off.

4-59