TM 9-2330-227-14&P
INSIDE DOMELIGHT, 24-VOLT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REPAIR - CONTINUED
15.
Knob (1)
Screw (2) and
Iockwasher (3)
16.
Rotary switch (4)
17.
16.
Door assembly (6)
19.
Sockets (9)
and (10)
20.
Door assembly (6)
21.
Connector (14)
22.
Body (16)
23.
24.
25 .
26.
Connector (14)
27.
Sockets
(9) and (10)
28.
Door assembly (6)
29.
30.
Rotary switch (4)
Knob (1)
Nut assembly (5)
Rotary switch (4),
gasket (7), and
washer (8)
Lamps (11) and (12)
Rubber seal (13)
Two screws (15)
Connecto r
Gasket (17)
Gasket (17)
Connecto r
Two screws (15)
Lamps (11) and (12)
Gasket (7)
and washer (8)
Rotary switch (4)
Nut assembly (5)
Using 3/16-inch flat-tip screwdriver,
unscrew and take off.
Lift off.
Using 7/8-inch box-end wrench, unscrew
and take off.
Using 3/16-inch flat-tip screwdriver,
pry out.
Push in, turn one-quarter turn
counterclockwise, and take out.
Lift off.
Using 3/16-inch flat-tip screwdriver,
unscrew and take out.
Pull off.
a. Using 3/16-inch flat-tip screwdriver,
pry out.
b. Check for damaged parts.
c. Replace defective parts.
Place in position.
Place in position.
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
Place in proper socket, push in, and
turn one-quarter turn clockwise.
Place in position.
Place in position.
Screw on, and tighten using 7/8-inch
box-end wrench.
4-84