TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 133 of 576

TM 9-2330-227-14&P

BLACKOUT STOPLIGHT ASSEMBLY

This task covers:

a. Removal (page 4-55)

c. Installation (page 4-56)

b. Lamps, Lens, and Door assembly

Replacement (page 4-56)

INITIAL SETUP

Tools

Personnel Required

Handle, ratchet, 3/8-inch drive

One

Screwdriver, flat-tip, 3/16-inch

Socket, 3/8-inch drive, 1/2-inch

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

NOT E

If wire connectors are to be repaired or replaced, go to wire connector procedure

(page 4-71).

Removal is not necessary for lamp, lens, or door assembly. For replacement, go to

step 4.

If circuit marker bands are missing or not readable, replace (page 4-73).

CAUTION

Do not pull on wires, only pull connectors apart. Pulling on wires could damage them.

1.

Blackout stoplight

End connector (2)

Pull out.

assembly (1)

4-55