TM 9-2330-227-14&P
SERVICE TAILLIGHT ASSEMBLIES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT - CONTINUED
9.
Service taillight
Door and lens
Place in position on service taillight
body (1)
assembly (2)
body (1).
10.
Six captive
Using 3/16-inch flat-tip screwdriver,
screws (3)
screw in.
If only repairing lamp, lens, or
door assembly, go to FOLLOW - ON
MAINTENANCE.
INSTALLATION
11.
Frame (4)
12.
Frame (4) and
service taillight
assembly (5)
13.
Wire harness (8)
service taillight
assembly (5)
Service taillight
Place in position, and aline with screw
assembly (5)
holes.
Two screws (6) and
Put in, and tighten using 9/16-inch
Iockwashers (7)
socket and ratchet handle with
3/8-inch drive.
Six connectors (9)
Push together.
4-54