appendix G
TM 9-2330-227-14&P
JUNCTION BOXES, 110-VOLT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
23.
24.
Fitting (9),
elbow (12), and
van body (8)
25.
Fitting (9) and
elbow (12)
26.
Fitting (9)
27.
Fitting (9) and
Fitting (9),
elbow (12), and
coupling (19)
a. Measure position of screw holes on
van body (8), and mark fitting (9)
and elbow (12) accordingly.
b. Using guide marks, portable drill, and
3/16-inch twist drill, drill holes in
fitting (9) and elbow (12).
c. Put in place.
Two screws (20)
Screw in, and tighten using number two
cross-tip screwdriver.
Screw (18)
Screw in, and tighten
flat-tip screwdriver.
Nut (15)
Put in place.
Two wires (17)
Feed through.
using 3/16-inch
4-45