TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 139 of 576

TM 9-2330-227-14&P

CLEARANCE LIGHT ASSEMBLY - CONTINUED

INSTALLATION - CONTINUED

FOLLOW-ON

NOT E

MAINTENANCE: Check operation of lights (page 2-22).

TASK ENDS HERE

INSIDE DOMELIGHT, 24-VOLT

This task covers:

a. Removal (page 4-62)

c. Installation (page 4-66)

b. Repair (page 4-62)

INITIAL SETUP

Tools

Personnel Required

Pliers, long round-nose

One

Screwdriver, cross-tip, number two

Screwdriver, flat-tip, 3/16-inch

Wrench, box-end, 7/16-inch

Wrench, box-end, 7/8-inch

ACTION

LOCATION

ITEM

REMARKS

NOT E

All 24-volt inside domelights are removed, repaired, and installed the same way. This

task is for one; repeat for the others.

If circuit marker bands are missing or not readable, replace (page 4-73).

4-61