TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 146 of 576

TM 9-2330-227-14&P

INSIDE DOMELIGHT, 110-VOLT - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

WARNIN G

Contact with live 110-volt electrical wires could result in serious injury or death. Make

sure power source is disconnected before performing maintenance on the electrical

system.

NOT E

All 110-volt inside domelights are removed, repaired, and installed the same way.

This task is for one; repeat for the others. Tag wires to aid in installation page 4-4).

REMOVAL

1.

Door

Captive screw (2)

a. Using 3/16-inch flat-tip screw-

assembly (1)

driver unscrew all the way.

b. Open door(1).

2.

Socket

Lamp (4)

Unscrew, and take off.

assembly (3)

3.

Box assembly (5)

Four screws (7)

a. Using number two cross-tip screw-

and van

driver, unscrew and take off.

ceiling (6)

b. Take off assembly (5).

4.

Socket

Two screws (8)

a. Using 3/16-inch flat-tip screwdriver,

assembly (3)

and wires (9)

unscrew screws (8) part way.

b. Take off wire (9).

4-66