TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 152 of 576

TM 9-2330-227-148&P

CIRCUIT MARKER BAND REPLACEMENT - CONTINUED

FOLLOW-ON

TASK ENDS HERE

NOT E

MAINTENANCE: Check operation of lights (page 2-22).

CONNECTOR RECEPTACLE, 24-VOLT

This task covers:

a. Removal (page 4-74)

b. Installation (page 4-75)

INITIAL SETUP

Tools

Materials/Parts

Pliers, diagonal cutting

Connectors, electrical (eight required)

Tool, crimping

Tape, electrical (item 21, appendix E)

Wire stripper, hand

Wrench, open-end, 7/16-inch

Personnel Required

(two required)

One

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

1.

2.

3.

4.

4-74

NOT E

Tag wires to aid in installation (page 4-4). if circuit marker bands are missing or not

readable, replace (page 4-73).

Cover assembly

Four screws (4)

Using two 7/16-inch open-end wrenches,

(1), connector

and nuts (5)

unscrew and take off.

receptacle (2),

and frame (3)

Connector

Cover assembly (1)

Take off.

receptacle (2)

Connector

Eight wires (7)

Using diagonal cutting pliers, cut

receptacle (2) and

where wires enter receptacle (2).

wire harness (6)

Frame (3)

Connector

Take off.

receptacle (2)