TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 151 of 576

TM 9-2330-227-14&P

WIRE CONNECTOR - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

FEMALE CONNECTOR REPAIR - CONTINUED

16.

New terminal (9)

Slide onto wire lead (7), and using

crimping tool, crimp end.

17.

Shell (8) and

Slide down over terminal (9) until seated.

sleeve (10)

18.

Connector halves

Apply compound to outside of female

(5) and (6)

connector, and push together until seated.

19.

Semitrailer lights

Apply power, turn on, and check operation

(page 2-22).

CIRCUIT MARKER BAND REPLACEMENT

20.

Marker band (11)

a.

b.

New marker band (11) a.

b.

Using 3/16-inch flat-tip screwdriver,

open tab ends (11) and take off.

Note number on band (11).

Get rid of band (11).

Using etching tool, etch proper number.

See Electrical Schematic on

pages 4-78 and 4-79.

Place on wire lead, and using crimping

tool, bend tab ends (12) over-wire.

4-73