CLEANING/INSPECTION - Continued
1
2
3
4
Figure 10.
Brake Cleaning/Inspection.
6.
Check gap between clevis (Figure 11, Item 1) and collar (Figure 11, Item 2). If gap exceeds 0.060 in. (1.52
mm) replace clevis.
GAP CANNOT EXCEED
0.060 IN. (1.52 mm)
1
2
Figure 11.
Brake Cleaning/Inspection.
NOTE
Push rod must be within 0.25 in. (6.35 mm) of the opening in the clevis. Rod must also not
extend more than 1/8 in. (3.18 mm) through the clevis.
7.
Check position of push rod (Figure 12, Item 1) in clevis (Figure 12, Item 2).
TM 9-2330-342-23&P
0072
0072-9