TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 667 of 1348
INSTALLATION - Continued
NOTE
Push rod must be within 0.25 in. (6.35 mm) of opening in clevis. The rod must also not extend
more than 1/8 in. (3.18 mm) through clevis.
16.
Install clevis (Figure 20, Item 1), pin (Figure 20, Item 2), and cotter pin (Figure 20, Item 3) on slack adjuster
(Figure 20, Item 6).
1
2
3
4
5
6
Figure 20.
Brake Installation.
17.
Install pin (Figure 20, Item 5) and cotter pin (Figure 20, Item 4) on slack adjuster (Figure 20, Item 6).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install wheel bearings and hub. (WP
0092)
2.
Adjust brakes. (WP
0066)
3.
Lubricate fittings. (WP
0047)
4.
Remove wheel chocks (TM 9-2330-342-10). (WP
0190)
END OF TASK
END OF WORK PACKAGE
TM 9-2330-342-23&P
0072
0072-15/16 blank
Back to Top
