INSTALLATION - Continued
6
5
4
3
2
1
Figure 18.
Brake Installation.
13.
Pull up on upper brake shoe (Figure 18, Item 6) and install upper cam roller (Figure 18, Item 4) and spring clip
(Figure 18, Item 5) as one assembly.
14.
Lubricate splines of S-cam shaft (Figure 19, Item 3) with grease.
1
2
3
4
5
Figure 19.
Brake Installation.
WARNING
Wear proper eye protection and use care when removing and installing retaining rings.
Retaining rings are under spring tension and can act as projectiles when released. Failure to
comply may result in injury or death to personnel.
15.
Install washer (Figure 19, Item 4), slack adjuster (Figure 19, Item 5), washer (Figure 19, Item 2), and retaining
ring (Figure 19, Item 1) on S-cam shaft (Figure 19, Item 3).
TM 9-2330-342-23&P
0072
0072-14