TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 808 of 1348

CLEANING/INSPECTION - Continued

6.

Remove rust, gummy rubber deposits, nicks, and gouges in the wheel bead seat surfaces.

END OF TASK

ASSEMBLY

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. Keep away from open flame and use in well-ventilated

area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately

with soap and water. Failure to comply may result in injury or death to personnel.

CAUTION

There are two types of wheel assemblies. Wheel assemblies are not interchangeable. Check

for Titan number 20076 or Accuride stamp on inner and outer wheels. Failure to comply may

result in damage to equipment.

1.

Apply sealing compound to first two threads of rim spud (Figure 7, Item 5).

3

4

13

15

16

14

16

2

1

9

3

4

5

6

7

8

Figure 7.

Wheel/Tire Assembly.

2.

Install grommet (Figure 7, Item 4) and rim spud (Figure 7, Item 5) in outer wheel (Figure 7, Item 6) with nut

(Figure 7, Item 3). Tighten nut to 175 to 200 lb-in (19.8 to 22.6 N·m).

TM 9-2330-342-23&P

0093

0093-8