TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 814 of 1348
ASSEMBLY - Continued
TRAJECTORY
INFLATION
HOSE
SAFETY
CAGE
1
Figure 13.
Wheel/Tire Assembly.
WARNING
•
While changing tires or while performing tire maintenance, stay out of the trajectory
as shown by the area indicated. Failure to comply may result in injury or death to
personnel.
•
When inflating tires, always use an inflation hose with an in-line gauge and clip-on
chuck. The gauge and valve must be mounted a minimum of 10 ft (3 m) away from
air chuck. Failure to comply may result in injury or death to personnel.
•
All personnel must remain a minimum of 10 ft (3 m) away from tire and out of trajectory
area. Failure to comply may result in injury or death to personnel.
•
Do not inflate above 5 psi (690 kPa). Failure to comply may result in injury or death
to personnel.
•
No attempt shall be made to correct the seating of wheel by hammering, striking or
forcing the components while the tire is pressurized. Failure to comply may result in
injury or death to personnel.
•
Whenever multi-piece rim wheels are being handled, personnel shall stay out of the
trajectory unless the supervisor can demonstrate that performance of the servicing
makes the personnel's presence in the trajectory necessary. Failure to comply may
result in injury or death to personnel.
TM 9-2330-342-23&P
0093
0093-14
Back to Top
