TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 963 of 1348

FIELD MAINTENANCE

SPRING ASSEMBLY REPLACEMENT (AXLES NO. 2 AND 3)

INITIAL SETUP:

Tools and Special Tools

Trestle (Jackstand), 7 Ton (6) (WP

0194, Table 1,

Item 15)

Lifting Device, Minimum Capacity 8,000 lbs (3,632

kg)

Multiplier, Torque (WP

0194, Table 1, Item 29)

Socket Set, 3/4 In. (WP

0194, Table 1, Item 35)

Tool Kit, General Mechanic's: Automotive

(WP

0194, Table 1, Item 47)

Wrench, Torque, Click, Ratcheting, 3/4" Drive, 600

ft-lb (WP

0194, Table 1, Item 42)

Materials/Parts

Bushing, Rubber Qty:

1 (WP

0195, Table 1, Item

42)

Liner Pad Qty:

1 (WP

0195, Table 1, Item 32)

Materials/Parts (cont.)

U-bolt Qty:

4 (WP

0195, Table 1, Item 80)

U-bolt Qty:

2 (WP

0195, Table 1, Item 4)

Personnel Required

Wheeled Vehicle Mechanic (2)

References

Fig. 35 (WP

0170)

WP

0062

WP

0063

Equipment Condition

Front wheels chocked (TM 9-2330-342-10).

(WP

0190)

Rear wheels removed (axles No. 2 and No. 3).

(WP

0094)

REMOVAL

WARNING

Rear of the trailer weighs approximately 8,000 lbs (3,632 kg). Attach suitable lifting device

prior to lifting or lowering frame. Failure to comply may result in injury or death to personnel.

NOTE

Both rear springs are removed the same way.

1.

Support suspension hanger assembly (Figure 1, Item 1) on jack stands.

TM 9-2330-342-23&P

0118

0118-1