REMOVAL - Continued
5.
Remove two rubber pads (Figure 2, Item 5) from spring assembly (Figure 2, Item 6).
6.
Repeat Steps (2) through (5) for axle No. 2. (Figure 2, Item 10).
7.
Remove four nuts (Figure 3, Item 2) and eight washers (Figure 3, Item 3) from two U-bolts (Figure 3, Item 4)
and lower trunnion block (Figure 3, Item 1) from suspension hanger assembly (Figure 3, Item 5).
1
2
3
4
5
Figure 3.
Spring Assembly (Axles No. 2 and 3) Removal.
8.
Remove two U-bolts (Figure 4, Item 1) and top plate (Figure 4, Item 2) from spring assembly (Figure 4, Item
3). Discard U-bolts.
1
2
3
Figure 4.
Spring Assembly (Axles No. 2 and 3) Removal.
TM 9-2330-342-23&P
0118
0118-3