TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 710 of 1364

TM 9-2350-238-20-1

2-101. MAINTENANCE OF BULKHEAD DISCONNECT TO CIRCUIT BREAKER BRANCHED

WIRING HARNESS (CONT).

DISASSEMBLY

For disassembly of wiring harness receptacle connector, refer to general maintenance, page 2-371.

1

Inspect for broken, damaged, or missing parts.

2

If damaged or missing, replace marker bands. Etch or stamp lead number on new band.

3

For repair of shell connectors, refer to general maintenance, page 2-371.

4

Electrical wire and rod are manufactured items, refer to appendix D.

5

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

For reassembly of wiring harness receptacle connector, refer to general maintenance, page 2-371.

1

Install bulkhead disconnect to circuit breaker branched wiring harness (1) in hull through battery

compartment.

2-684