TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 714 of 1364

TM 9-2350-238-20-1

2-102. MAINTENANCE OF HULL DISCONNECT TO SLIP RING LEAD AND CIRCUIT

BREAKER (CONT).

1

Inspect for broken, damaged, or missing parts.

2

If damaged or missing, replace marker bands. Etch or stamp lead number on new band.

3

For repair of cable terminals, refer to general maintenance, page 2-371.

4

Electrical wires are manufactured items, refer to appendix D.

5

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

REASSEMBLY

1

For reassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

2

Install two cable terminals (1), four washers (2), and two screws (3) on circuit breaker (4).

2-688