TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 708 of 1364

TM 9-2350-238-20-1

2-101. MAINTENANCE OF BULKHEAD DISCONNECT TO CIRCUIT BREAKER

BRANCHED WIRING HARNESS.

This task covers:

a.

Removal

d.

Reassembly

b.

Disassembly

e.

Installation

c.

Inspection/Repair

INITIAL SETUP

Materials/Parts

Electrical wire (figure D-2, appx D)

Gasket

Nonmetallic rod (figure D-24, appx D)

References

TM 9-2350-238-24P-1

Equipment Conditions

2-840 Batteries disconnected and removed

2-384 Hull access cover removed

Genera/ Safety Instructions

Failure to remove or disconnect

batteries before removing or installing

any electrical wiring harness or lead

may result in injury or damaged

equipment.

Failure to remove or disconnect batteries before removing or installing any electrical

wiring harness or lead may result in injury or damaged equipment.

1

Wiring harnesses and leads are secured to the hull and components with loop clamps, straps,

clips, ground screws, etc. Remove only the hardware which secures the wiring harness or lead

which is being removed.

2-682