TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 704 of 1364

TM 9-2350-238-20-1

2-99. MAINTENANCE OF FLOOR DISCONNECT TO BULKHEAD DISCONNECT WIRING

HARNESS (CONT).

REMOVAL

1

2

3

4

5

Failure to remove or disconnect batteries before removing or installing any electrical

wiring harness or lead may result in injury or damaged equipment.

Wiring harnesses and leads are secured to the hull and components with loop clamps, straps,

clips, ground screws, etc.

Remove only the hardware which secures the wiring harness or lead

being removed.

Remove four hexagon head capscrews (1), four lockwashers (2), and wiring harness protection

access cover (3) from hull.

Remove four screws (4) and four washers (5), and tag and disconnect receptacle connector (6)

from bulkhead receptacle.

If damaged, remove gasket (7) from receptacle connector (6).

Remove four screws (8) and four washers (9), and tag and disconnect receptacle connector

(10) from floor disconnect receptacle.

2-678