TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 711 of 1364

TM 9-2350-238-20-1

2

Install gasket (2) on receptacle connector (3).

3

Install receptacle connector (3) with gasket (2), four washers (4), and four socket head

capscrews (5) on bulkhead.

4

Connect plug connector (6) to receptacle connector (3).

5

Untag and connect shell connector (7) to line connection.

6

Untag and connect shell connector (8) to line connection.

7

Untag and connect shell connector (9) to line connection.

8

Untag and connect shell connector (10) to rectifier (11).

9

Untag and connect shell connector (12) to rectifier (11).

10

Untag and connect shell connector (13) to 15 AMP

11

Untag and connect shell connector (15) to 20 AMP

12

Untag and connect shell connector (17) to 15 AMP

13

Untag and connect shell connector (19) to 15 AMP

14

Wiring harnesses and leads are secured to the hull

circuit breaker (14).

circuit breaker (16).

circuit breaker (18).

circuit breaker (20).

and components with loop clamps, straps,

clips, ground screws, etc. During installation, make sure the wiring harness or Iead is secure

and all hardware is tight.

2-685