TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 715 of 1364

TM 9-2350-238-20-1

1

Install hull disconnect to slip ring lead and circuit breaker (1) in hull.

2

Install circuit breaker (2) and two screws

3

Untag and connect plug connector (4) to

4

Untag and connect plug connector (5) to

5

Wiring harnesses and leads are secured

(3) on bulkhead.

hull disconnect.

slip ring.

to the hull and components with loop clamps, straps,

clips, ground screws, etc. During installation, make sure the wiring harness or lead is secure

and all hardware is tight.

2-689