TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 730 of 1364

TM 9-2350-238-20-1

2

Open air cleaner blower motor access

door (1).

Failure to remove or disconnect

batteries before removing or installing

3

Tag and disconnect shell connector (2)

any electrical wiring harness or lead

from forward air cleaner centrifugal fan.

may result in injury or damaged

equipment.

4

Tag and disconnect shell connector (3)

from line connection disconnect.

1

Wiring harnesses and leads are secured to

the hull and components with loop clamps,

5

Remove disconnect to forward

straps, clips, ground screws, etc. Remove

blower motor electrical lead (4)

only the hardware which secures the

through driver’s compartment.

wiring harness or lead being removed.

air cleaner

from hull

1

Inspect for broken, damaged, or missing

parts.

2

If damaged or missing, replace marker

bands. Etch or stamp lead number on

new band.

3

For repair of shell connectors, refer to

general maintenance, page 2-371.

4

Electrical wire is a manufactured item,

refer to appendix D.

5

Repair is by replacement of authorized

parts (TM 9-2350-238-24P-1).

2-704