TM-9-2350-238-34-2
CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
APRIL 1992
TM-9-2350-238-34-2 - Page 34 of 327
TM 9-2350-238-34-2
2-20. MAINTENANCE OF WINCH LEVEL WIND AND CONNECTING LINK SLIDE.
This task covers: a .
Disassembly
c.
Reassembly
b.
Inspection/Repair
d.
Adjustment
INITIAL SETUP
Tools and Special Tools
General mechanic’s tool kit, automotive
(SC 5180-90-CL-N26)
Shop equipment, automotive mainte-
nance and repair: field maintenance,
basic, less power (SC 4910-95-A31)
Press, arbor
Wrench set, socket, 1/2-in. square
drive
Materials/Parts
Drive screw (12) (MS21318-14)
Grease (item 9, appx B)
Insert (MS51831-202L)
Lockwasher (4) (MS35338-43)
Lockwasher (3) (MS35338-44)
Lockwasher (MS35340-46)
Self-locking nut (MS21044N12)
Personnel Required
2
References
TM 9-2350 -238-20-2
TM 9-2350 -238-24P-2
Equipment Conditions
Winch level wind removed (TM
9-2350-238-20-2)
DISASSEMBLY
1
2
Disconnect two quick-release pins (1) and
remove level wind yoke bracket (2).
Remove two machine screws (3), two
Iockwashers (4), two chain assemblies (5),
and two quick release pins (1) from yoke
level wind bracket (2).
2-21
Back to Top
