TM-9-2350-238-34-2
CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
APRIL 1992
TM-9-2350-238-34-2 - Page 40 of 327
2 0
21
2 2
23
2 4
Install rod end clevis (48), and two
thrust washer bearings (49), and using
hammer and punch, install slide bar
headless straight pin (50) and spring pin
(51) to each of two manual control
clevis handles (52).
Install clevis rotating eye bracket (53),
two thrust washer bearings (54), and us-
ing hammer and punch, install slide bar
headless straight pin (55) and spring pin
(56) to each of two rod end clevises
(48).
TM 9-2350-238-34-2
Install two quick release pins (60), two
chain assemblies (61), two new lock-
washers (62), and two machine screws
(63) to yoke level wind bracket (64).
Install yoke level wind bracket (64) and
secure with two quick release pins (60).
Install two manual control clevis handles
(52), four thrust washer bearings (57),
and using hammer and punch, install two
slide bar headless straight pins (58) and
two spring pins (59) to level wind hous-
ing (2).
2-27
Back to Top
