TM-9-2350-238-34-2
CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
APRIL 1992
TM-9-2350-238-34-2 - Page 36 of 327
TM 9-2350-238-34-2
6
7
8
9
Remove three machine bolts (19), three
10 If damaged, remove two sleeve bearings
flat washers (20), and level wind access
(30) from cross weldment bar (31).
cover (21).
If damaged, remove four drive screws
(22) from each of three instruction plates
(23) and remove three instruction plates
from level wind access cover (21).
Remove nut (24), Iockwasher (25), hex-
agon head capscrew (26), and hub slide
clamp (27) from level wind housing (10).
Disconnect quick release pin (28) and
remove rigid connecting link (29) from
level wind housing (10).
11 Remove machine screw (32), Iockwasher
(33), chain assembly (34), and quick
release pin (28) from cross weldment bar
(31).
12 Remove self-locking nut (35), and flat
washer (36) from shaft of cable guide
(37).
13 Remove thrust washer bearing (38),
helical spring (39), sleeve spacer (40),
and remote control lever (41) from shaft
of cable guide (37).
2-23
Back to Top
