TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 254 of 772

TM 9-2350-260-20-1-2

THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (LEFT SIDE) TEST AND REPLACEMENT (2D

ENGINE) (Sheet 6 of 6)

7.

At other end of tube (E), using 1-1/2 inch wrench,

install tube end fitting (F) on adapter (G).

8.

Using 1-1/2 inch wrench, tighten tube end fitting

(D) at oil cooler.

9.

Using 1-5/8 inch wrench, install adapter (H).

10.

Using hands, install tube end fitting (J) on adapter

(H).

11.

Go to other end of tube (K) and, using 1-1/2 inch

wrench, install tube end fitting (L) on adapter (M).

12.

Using 1-1/2 inch wrench, tighten tube end fitting

(J) at oil cooler.

13.

Replenish

oil

lost

during

valve

assembly

replacement (LO 9-2350-260-12).

14.

Remove rags from transmission and oil cooler.

15.

Start and run engine (TM 9-2350-260-10).

Check

for oil leaks.

16.

Install engine shroud (page 9-3).

17.

Install transmission shroud (page 9-23).

End of Task

TA147623

6-177