TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 258 of 772

TM 9-2350-260-20-1-2

ENGINE TO TRANSMISSION OIL LINE TUBE ASSEMBLIES (INNER AND OUTER) REPLACEMENT (2A ENGINE)

(Sheet 4 of 5)

INSTALLATION:

1.

Position new gaskets (A) and (B) onto adapters

(C) and (D).

2.

Using 1-5/8 inch wrench, install adapter (C) into

transmission oil line mount (E).

3.

Using 1-5/8 inch wrench, install adapter (D) into

transmission oil line mount (E).

4.

Position tube assembly (F) through engine shroud and, using 1-1/2 inch wrench on connector (G), tighten connector

(G) onto adapter (C).

5.

Position tube assembly (H) through engine shroud and, using 1-1/2 inch wrench on connector (J), tighten connector

(J) onto adapter (D).

6.

Position new washers (K) and (L) onto adapters

(M) and (N).

7.

Using 1-5/8 inch wrench, install adapter (M) to oil

cooler (P).

8.

Using 1-5/8 inch wrench, install adapter (N) to oil

cooler (P).

Go on to Sheet 5

TA147627

6-181