TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 406 of 772

TM 9-2350-260-20-1-2

AIR CLEANER (ARMORED) BLOWER FAN POWER LEAD REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

Install the following parts onto lead (A): nut (B),

washer (C), washer (D), and new gasket (E).

2.

Install lead (A) through adapter (F).

Pull

approximately 10 inches of lead out of adapter.

3.

Install shell (G) approximately 5 inches over end of

lead (A) and install washer (H).

4.

Pull shell (G) toward end until it is stopped by

washer (H).

5.

Push gasket (E) and washers (C) and (D) into

adapter (F).

6.

Thread nut (B) onto adapter (F).

Using pliers,

tighten nut.

7.

Install blower fans (page 7-144).

8.

Connect electrical connector (K).

9.

Check

operation

of

air

cleaner

(TM

9-2350-260-10).

10.

Close top deck grille doors (TM 9-2350-260-10).

End of Task

TA148212

7-137