TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 45 of 772
TM 9-2350-260-20-1-2
POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 10 of 26)
NOTE
When removing screw (AJ) hold onto
quick-disconnect ring (AK).
Or it will
snap open and fall down into engine
compartment.
26.
Using 3/4 inch socket, remove screw (AJ) securing
quick-disconnect ring (AK).
27.
Remove both rings (AK).
28.
Using hammer and pinch bar, tap final drive
adapter (AL) toward final drive (both ides) far
enough to free adapter from universal joint.
NOTE
Continue tapping final drive adapter
(it will move 1-1/2 inches) until gears
release.
29.
Hang two fabricated final drive guide shields (Fig.
1, Appendix F) (one on each side) at final drive
universal joints (AM) to prevent hangups when
powerplant Is removed.
Go on to Sheet 11
TA147936
5-35
Back to Top
