TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 36 of 772
TM 9-2350-260-20-1-2
POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 1 of 26)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
5-3
Installation
5-14
TOOLS: 5/16 in. combination box and open end wrench
5 ton hoist or comparable lifting device capable of lifting powerplant 12 ft. high
Ratchet with 1/2 in. drive
2 in. extension with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
Ratchet with 3/4 in. drive
1-1/2 in. socket with 3/4 in. drive
Torque wrench with 3/4 in. drive (0-600 lb-ft) (0-813 N
•
m)
7/16 in. combination box and open end wrench (2 required)
Adjustable wrench
Spanner wrench
Long round nose pliers
Flat-tip screwdriver
Putty knife
Pinch bar
SPECIAL TOOLS:
Powerplant sling (Item 31, Chapter 3, Section I)
FABRICATED TOOLS: Final drive guide shield (Fig. 1, Appendix F) (2 required)
SUPPLIES:
Covers for fire extinguisher tubing fittings
Covers for prima
fuel line fittings
Covers for hydraulic brake line fittings
Covers for fuel return line fittings
Covers for air cleaner outlet hose connect point
Grease (Item 36, Appendix D)
Heavy masking tape (Item 57, Appendix D)
Wooden blocks, 12 x 12 x 14 in. (3 required)
Lockwasher (MS35338-44) (4 required)
Lockwasher (MS35338-53) (2 required)
Lockwasher (MS35338-65) (12 required)
Gasket (2 required)
Rag (Item 65, Appendix D)
Lockwire (Item 60, Appendix D)
Adhesive (Item 2, Appendix D)
PERSONNEL:
Three
REFERENCE:
TM 9-2350-260-10
Go on to Sheet 2
TA147927
5-26
Back to Top
