TM 9-2350-260-20-1-2
POWERPLANT REPLACEMENT (2A ENGINE) (Sheet 24 of 24)
59.
Remove rope or tape holding generator air duct
(AW) and position duct on bulkhead.
60.
Position screen (AX) to bulkhead and, using 7/16
inch socket, install six screws (AY).
61.
Install upper engine access cover (page 16-44).
62.
Connect battery ground straps (page 10-294).
63.
Install top deck (page 16-22).
64.
Install transmission shroud (page 9-23).
65.
Traverse turret to travel lock position.
Lock gun
tube (TM 9-2350-260-10).
Apply brakes and place
shifting lever in P (park).
66.
Remove blocks from both tracks at front and rear.
67.
Perform operational test (TM 9-2350-260-10).
End of Task
TA147926
5-25