TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 32 of 772
TM 9-2350-260-20-1-2
POWERPLANT REPLACEMENT (2A ENGINE) (Sheet 21 of 24)
WARNING
Support brake rod access covers (AA) with hand to prevent personal injury.
42.
Position left and right brake rod access covers (AA) to hull. Manually install 12 screws and new lockwashers (AB).
43.
Using 9/16 inch socket, tighten 12 screws and
lockwashers (AB).
44.
Remove protective coverings from air cleaner
outlet hose connect points (AC) on each side of
tank.
45.
Manually install two air cleaner outlet hoses (AD)
on each side of tank.
46.
Position clamp (AE) and, using 7/16 inch wrench,
tighten nut of clamp (AE) to hold air cleaner outlet
hose (AD) on each side of tank.
NOTE
Close grille doors and manually
traverse turret to bring gun tube over
driver's position (TM 9-2350-260-10).
Go on to Sheet 22
TA147923
5-22
Back to Top
