TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 28 of 772
TM 9-2350-260-20-1-2
POWERPLANT REPLACEMENT (2A ENGINE) Sheet 17 of 24)
NOTE
When installing screw (K), hold onto
quick-disconnect ring (J) or it will
snap open and fall down into engine
compartment.
22.
Install screw (K).
Using 3/4 inch socket, tighten
screw on both sides of tank.
23.
String new lockwire (L) (Item 60, Appendix D)
through screw (K) and opening in quick-disconnect
ring (J) on both sides of tank.
24.
Reach between transmission and under left
transmission
mount
and
remove
protective
coverings from fuel return line (M) openings.
25.
Reach between transmission and under left
transmission mount and manually connect quick-
disconnect (M).
NOTE
It may be necessary to reach between
left
transmission
mount
and
universal joint to connect quick-
disconnect (M).
26.
Raise guide lock latches.
27.
Push powerplant guide (D) forward until lockring
snaps into place.
Guide is now locked into
position.
Go on to Sheet 18
TA147919
5-18
Back to Top
